Product Catalogue
Contact us

Single Phase Electricity Meter
(Single Phase Watt-hour Meter, Single Phase KWH Meter, Single Phase Energy Meter, Single Phase DIN-rail Meter)

DDS238-2 ZN/S
DDS238-2 ZN/S Single Phase Electricity Meter

This product has been discontinued and removed from our shelves.

The DDS238-2 ZN/S single phase electricity meter conforms to the technical requirement of IEC61036. It is used to measure variable parameter and single phase two-wire AC active energy.
With the data communication rules designed as per the requirement of DL/T645 or MODBUS-RTU, this small-size meter also has many good properties like, decent stability, high durability, high overload capability, and low power loss.

Basic Function
1. The single phase electricity meter can display realtime voltage, current, power, power factor, and frequency.
2. Measurement of bi-directional total active energy and the measurement of reverse active energy in the total active energy are the main functions of this product.
3. The device comes with a backlit LCD display.
4. It has pulse LED indicator for working status indication. The pulse output is available with optical coupling isolation.
5. It is designed with infrared and RS485 communication port, and supports 35mm Din-rail installation method.

Optional Function
1. Optionally, the single phase electricity meter can be designed to measure both the total forward active energy and reverse active energy.
2. Energy-reset function. This optional function won't cause any difference on the display of total energy.

Technical Data
Rated voltage110V, 120V, 220V, 230V, 240V
Working voltage range0.8~1.2Un
Rated Current5(65)A, 5(30)A, 10(40)A, 5(60)A or other as required
Rated Frequency50Hz or 60Hz
Connection modeDirect type
DisplayLCD
Accuracy class Class 1
Power consumption<2W/10VA
Start current0.004Ib
Constant 800~3200 IMP/KWh
Pulse output Passive pulse, pulse width is 80+5 ms
Communication port RS485 port, baud rate 1200~9600 bps，default is 4800bps
Executive standard IEC62053-21, DL/T645-2007 or MODBUS-RTU
Working temperature-30℃~70℃
Outline dimension LXMXH90×35×60mm
Weight Approx 0.14kg

Wire connection

Outline dimension

Related products
    2. DDS238-2 SW Single Phase Electricity MeterThe DDS238-2 SW single phase electricity meter is designed to measure single phase two-wire AC active energy and variable parameter. All of its functions meet the technical requirement for class 1 single phase watt hour meter by the standard of IEC61036.